1
12V Car microprocessor repeller (version MINI):
Antykuna mini effective ultrasonic vermin repeller
- with 1 loudspeaker, - with 2 loudspeakers, - with 2 integrated loudspeakers
Check the content
The set contains: ANTYKUNA device, 4 pcs. of zip tie, 2 pcs. of nuts, 2 pcs. of washers,
2 screws,
Mounting instructions
Check if the set is complete.
Find the place where you would like to mount ANTYKUNA device (at the distance of
the cable’s length from the device to the battery’s positive terminal or the power source
Mount the device at an angle of 350-45° at the place of your choice using zip ties and/or
mounting screws to the car’s body or other immobile parts in the engine’s compartment.
Connect ANTYKUNA device’s cables to the battery terminals remembering that the
black protective pipe must not touch hot parts of the engine.
Using the nut and the washer, connect RED “+” cable and in the same way connect
BLUE cable “-“. Secure the device by fixing zip tie to the device mounting points and
immobile parts near Antykuna device.
After nuts have been tightened up, the led on the device is on flashing in various colors
and the emission of variable frequency of ultrasounds will start .
If the led is off and the sounds are not produced, check connections of cables to the
battery.
Warranty of effective operation
-
possible mounting places
-
mounted device
-
connection to the battery
-
device in operation
Manufacturer, manufactured for:
