6
1. On / Off switch
2. Locking button
3. Electronic speed control
4. Spindle lock button
5. Polishing / sanding pad
6. Polishing attachment
7. Handle
8. 2x Allen screw
9. 2x carbon brushes
10. Allen key
Assembly
Handle
Clamp the handle (7) over the brackets provided on the machine head and fasten it on
both sides with the Allen screws (9).
Press the shaft lock button (4) and turn the polishing / sanding pad (5) until the shaft lock
engages.
Screw the polishing / sanding pad firmly onto the machine spindle (B4) while pressing
the shaft lock button.
The polishing / sanding pad (5) has a Velcro pad on which the polishing and
Abrasive discs with Velcro can be easily put on and taken off.
Place the polishing or grinding discs on the edge and apply pressure to the center of the
plate. (B5)
To peel off, grasp the edge of the polishing / sanding discs and pull them off.
The handle can be mounted for right or left hand use. (B2) (B3)
Polishing / sanding pad
Change polishing attachment / grinding wheels
Summary of Contents for MMT A170 704
Page 10: ......
