Mammoth COMP02034, Owner'S Manual

7

As a protection for your battery, the fridge/ 

  freezer switches OFF automatically if the power  
  source voltage is insufficient.

Note: 

It is important that the correct cable size and 

gauge is used for the installation of the DC supply 
as over distance the voltage can decrease if the 
incorrect cable size and gauge cable is being used.

Always consult a qualified automotive electrician  

  when using a DC extension cable.

OPERATING YOUR FRIDGE/FREEZER WITH  
240V AC

Plug the 240V AC power cable into the AC  

  POWER socket (as circled below) on the end of  
  the fridge/freezer and then connect to a suitable  
  240V AC power source. 

The fridge/freezer will automatically turn on, there  

  is no requirement to switch the appliance on.

The display will automatically show the current  

  internal cabinet temperature.

The fridge/freezer is equipped with a  

  multi-voltage internal power supply with priority  
  circuit for connecting to an AC voltage power  
  source of 240V.

The power input socket is fitted with a 15A DC  

  blade and a 5A/250V glass fuse for protection.

Caution: 

Do not touch cables, plugs or switches 

with wet hands or when your feet are in contact 
with water! If you operate your fridge/freezer on 
board a boat by means of a shore connection to  
a 240V AC power source, the power connection 
must include an earth leakage RCD residual  
current device.

AC Power Cable

DC Power Cable

220-240V AC Power inlet

12-24V DC Power inlet