Mamo Cuce A3 Digit, Owner'S Manual

RE V. 2.0/07-13 

CuCE A3 Digit 23

1 

INTRODUCTION AND GENERAL INFO

1.1 

USER MANUAL

This Owner Manual represents version:
2.0 edition
Year and Month of printing: 2013, July

1.2 

PURPOSE OF THIS MANUAL

This manual is an integral part of the machine. Read all warnings and instructions very carefully, as they give important safety precaution 
and information about the USE AND MAINTENANCE OF THE PRODUCT. Descriptions and illustrations of this manual are not binding; 
Tosingraf reserves the right to modify this document without a commitment to updating it. Read the instruction manual carefully for the 
correct use and before doing any adjustment or maintenance services. Keep this manual in a safe place so that it will be available for 
further reference.

1.3 

USER MANUAL CARE

In the case of the sale of the machine it must be accompanied by this manual in its present constitution with all additions and changes as 
may be entered and submitted by the manufacturer.
This manual will accompany life in the machine until it is finally disposed: therefore it must be stored carefully in a safe place.

1.3.1    i

nformation

ownershiP

This manual contains proprietary information. All rights are reserved.
This manual may not be reproduced or copied, in whole or part, without the written consent of TOSINGRAF S.r.l.

1.4 

ADDITIONAL INFORMATIONS AND RESPONSIBILITIES

The manufacturer declares that this manual reflects the state of the art at the time of delivery of the machine and therefore can not be 
considered inadequate in the face of new experiences and knowledge: The manufacturer does not consider itself obliged to update the 
manual in case of any new findings also if it deems appropriate forwarding of updates to events detected by its Customer Care Service 
during repair work or training.
The manufacturer claims as of now considered relieved of its responsibilities in the following cases:

• 

improper use of the machine

• 

use of the machine by unauthorized personnel

• 

Incorrect installation

• 

energy supply systems are not suitable

• 

lack of maintenance

• 

unauthorized modifications

• 

use of non-original or do not comply with the manufacturer’s specifications

The manufacturer refuses the withdrawal of the used machine without the manual.

For any questions or unforeseen use consult the manufacturer indicating Model and Serial number of the machine

The manufacturer assumes no liability for direct or indirect damages to persons, domestic animals or arising from use of this manual or the 
machine in conditions other than those provided. Tosingraf reserves the right to make changes or improvements without prior notification 
to this guide and to the machines, the machines may also marketed the same model as the one referred to by this manual, but with a 
different serial number.

WARNING! Before certain procedures can appear this message. His failure to comply may result in injury to the operator and / 
or equipment.

ENG

Ch A P t ER  1:  iN t RODuC t iON