Mamo Cuce A3 Digit, Owner'S Manual

24 

RE V. 2.0/07-13

1.5 CONVENTIONS

1.5.1    d

efinitions

Machine

: Indicates the machine specified in its entirety.

Frame

: structure of the machine

Qualified Personnel

: people who for their expertise and experience as well as knowledge of relevant standards, safety regulations and conditions 

of service, are able to recognize and avoid all possible danger to persons and any possible damage to the part and the machine .
The descriptions of direction, sense and position (right and left of the machine) refer to the position of the operator in front of the machine.

1.5.2    t

yPograPhiC

Conventions

A (generic letter of example): 

symbolic representation of a control or signaling

1 (number of generic example): 

symbolic representation of a part of the machine

1.6 

USED INDICATIONS

The manufacturer has used its experience and has obtained the necessary expertise to make to the machine, to which the present ma-
nual, the safety work conditions for the operators.
A careful reading of the instructions contained in the various sections of the Manual is the first essential element of security:
No operation of any type must be carried out on the machine without the operator having read the section concerned.
Each operator must ensure to fully understand the contents of this manual before performing any operation, and in particular before 
performing maintenance.

The hazard included those procedures where non-compliance can produce injuries.

WARNING! Other warnings found on the machine, or adhesives, are reproduced in the corresponding section.

Abrasions or removal causes the mismatch in this manual and are the responsibility of the user.

1.7 

MANIFACTURER’S DATA

Tosingraf s.r.l.

Via Istria, 23

36027 Rosà (VI) – Italy

Tel.: +39 0424/898312 - Fax: +39 0424/539134 

e-mail: info@mamosrl.com - www.mamosrl.com

1.8 

MACHINE IDENTIFICATION DATA

The machine is identified by the following specifications:

• 

model CUCE A3 DIGIT

• 

identification number __________

• 

voltage, frequency and maximum power consumption: 230V - 50/60Hz - 100W

• 

year of construction: see identification number

See label on the machine reproduced below:
The plate is located in the rear of the machine.

Modello - Type

Tensione - Tension (V)

Peso - Weight (kg)

Anno - Year

Matricola - Serial number

Potenza - Power (kW)

Ch A P t ER  1:  iN t RODuC t iON