RE V. 2.0/07-13
CuCE A3 Digit 25
2
RULES AND CONDITIONS OF USE
2.1
LEGAL REGULATIONS
Since this is the machine where the components of command and control take on considerable importance for the quality and precision
machining and also with regard to the safety of the machine operators has been made in conformity with the Directives 2006/95/EC “Low
Voltage” and EMC 2004/108/EC “Electromagnetic Compatibility”.
2.2
HARMONIZED RULES
The risk assessment performed in accordance with the Essential Health and Safety Requirements of the aforementioned European and
national laws followed the instructions in the Harmonized Standard UNI EN ISO 12100:2100.
It produced the design and construction of the safety devices described in Section relative to the application of signals above.
Given the importance of controls and on-board control has been followed with particular attention to the Harmonized Standard CEI EN
60204. It is also of relevance to any aspects of electromagnetic compatibility.
2.3
SAFETY PRECAUTIONS
Operators must read and follow this manual carefully and familiarise themselves with the correct operating and maintenance procedures
of the appliance. Failure to observe the rilevant safety rules may result in the injury to the operator and may cause damage to the machine.
Keep this manual for future reference and to support personnel training. Keep this manual together with the product in the event that you
sell or give it to a new user.
2.4 WARRANTY
Period of guarantee of 12 months.
•
in order to demand repair in guarantee you must contct the MAMO service centre. If the Clauses of Guarantee are respected, the
appliance will be repaired od replaced without expenses .
For any other problem or require needed to integrate the indications provided in the User Manual of the purchased item, the MAMO com-
pany put a technical servicing to your disposal.
2.5
CLAUSES OF GUARANTEE
•
The guarantee is restricted to repairing or replacing the appliance that present defects in manufacturing and when there are
defects of conformity to the sale contract: only in this case the guarantee is free of charges included the charges of transport.
•
The guarantee is valid only if the document (original invoice) proving the date of purchase is exhibited. The defected product must
be returned complete with all accessories.
•
The guarantee may not apply if the serial number on the product has been altered, deleted, removed.
•
This guarantee does not cover damages resulting from misuse or neclet, improper use or installation from failure to observe the
relevant requirements and recommendations provided in the instruction manual, tampering, modification or alteration of the pro-
duct, as well as shocks and accident especially of the external parts. Moreover the guarantee explicitly escludes damages caused
by the incorrect connection or voltage, that are different from those indicated on the technical features or rating plate, rush and as
well as infiltration of liquids, fire, electrostatic discharges or discharges due to the lightning, overload and/or other phenomenons
out of appliance.
•
This guarantee does not include parts subjected to normal wear.
•
On expiry of the guarantee the assistance service will be at the expenses of the owner as well as all replaced parts, cost of labour
and transport charges, according to the rate in force.
•
Any controversy or dispute arising out of the present guarantee must be settled by the Law Court of Bassano del Grappa (VI).
ENG
Ch A P t ER 2: RuL ES A ND CONDit iONS Of uSE
Summary of Contents for Cuce A3 Digit
