32
RE V. 2.0/07-13
s
taPler
Position
adjustment
The bookletmaker allows to operate on different sheet sizes thanks
to the adjustable position of the staple heads.
Proceed as follows to adjust the position of the staple heads:
•
open the cover of the staple group;
•
unlock the staple head and place it on another seat
•
lock the staple head as illustrated below.
To operate the machine, always use a test sheet like the original
Before punching remove any clips and staples as a metal objects cause damage to the pins
Do not feed more than 25 sheets at a time, risk of jamming
Change or feed the staples when the LED for signalling that staples are over in left and right heads appears
f
eeding
the
staPles
Proceed as follows to feed the staples in the heads:
•
raise the cover of the staple heads group;
•
pull the cap backwards until it is locked;
•
open the staples cover
•
introduce the staples,
•
close the stapler cover and release the cap in position;
•
close the cover of the staple heads group.
Ch A P t ER 6: uSE
Summary of Contents for Cuce A3 Digit
