manualshive.com logo in svg

Man B&W S50MC-C8-TII, Project Manual

The Man B&W S50MC-C8-TII Project Manual is a comprehensive and essential resource for proper installation and operation of this advanced marine engine. This manual is available for free download from 88.208.23.73:8080, providing users with a valuable resource to ensure efficient and reliable performance of this product.

Share
Download
background image

MAN B&W 

18.06

Page 3 of 5

MAN Diesel

MAN B&W MC/MCC engines

198 62 388.4

Bearing Temperature Monitoring System

The Bearing Temperature Monitoring (BTM) sys-
tem continuously monitors the temperature of the 
bearing. Some systems measure the temperature 
on the backside of the bearing shell directly, other 
systems detect it by sampling a small part of the 
return oil from each bearing in the crankcase.

In case a specified temperature is recorded, either 
a bearing shell/housing temperature or bearing oil 
outlet temperature alarm is triggered.

In main bearings, the shell/housing temperature 
or the oil outlet temperature is monitored depend-
ing on how the temperature sensor of the BTM 
system, option: 4 75 133, is installed.

In crankpin and crosshead bearings, the shell/
housing temperature or the oil outlet temperature 
is monitored depending on which BTM system is 
installed, options: 4 75 134 or 4 75 135.

For shell/housing temperature in main, crankpin 
and crosshead bearings two high temperature 
alarm levels apply. The first level alarm is indi-
cated in the alarm panel while the second level 
activates a slow down.

For oil outlet temperature in main, crankpin and 
crosshead bearings two high temperature alarm 
levels including deviation alarm apply. The first 
level of the high temperature / deviation alarm is 
indicated in the alarm panel while the second level 
activates a slow down.

In the Extent of Delivery, there are three options:

4 75 133

Temperature sensors fitted to main bear-
ings

4 75 134

Temperature sensors fitted to main bear-
ings, crankpin bearings, crosshead bear-
ings and for moment compensator, if any

4 75 135

Temperature sensors fitted to main bear-
ings, crankpin bearings and crosshead 
bearings

S42MC7, S40MC-C9, S35MC7, L35MC6, S35MC-
C9 and S26MC6 engines are as standard speci-
fied with option 4 75 133.

Bearing Wear Monitoring System

The Bearing Wear Monitoring (BWM) system mon-
itors all three principal crank-train bearings using 
two proximity sensors forward/aft per cylinder 
unit and placed inside the frame box.

Targeting the guide shoe bottom ends continu-
ously, the sensors measure the distance to the 
crosshead in Bottom Dead Center (BDC). Signals 
are computed and digitally presented to computer 
hardware, from which a useable and easily inter-
pretable interface is presented to the user.

The measuring precision is more than adequate to 
obtain an alarm well before steel-to-steel contact 
in the bearings occur. Also the long-term stability 
of the measurements has shown to be excellent.

In fact, BWM is expected to provide long-term 
wear data at better precision and reliability than 
the manual vertical clearance measurements nor-
mally performed by the crew during regular serv-
ice checks.

For the above reasons, we consider unscheduled 
open-up inspections of the crank-train bearings to 
be superfluous, given BWM has been installed.

Two BWM ‘high wear’ alarm levels including devi-
ation alarm apply. The first level of the high wear / 
deviation alarm is indicated in the alarm panel only 
while the second level also activates a slow down.

The Extent of Delivery lists four Bearing Wear 
Monitoring options of which the two systems from 
Dr. E. Horn and Kongsberg Maritime could also 
include Bearing Temperature Monitoring:

4 75 142

Bearing Wear Monitoring System XTSW. 
Make: AMOT

4 75 143

Bearing Wear Monitoring System BDMS. 
Make: Dr. E. Horn

4 75 144

Bearing Wear Monitoring System PS-10. 
Make: Kongsberg Maritime

4 75 147

Bearing Wear Monitoring System OPEN-
predictor. Make: Rovsing Dynamics

K98MC and 98-46MC-C engines are as standard 
specified with Bearing Wear Monitoring for which 
any of the mentioned options could be chosen.

Summary of Contents for B&W S50MC-C8-TII




















































































































































































































































































































































































































Reviews:

No comments

Related manuals for B&W S50MC-C8-TII

A'OK PLUS BLOCK AM45 Manual preview
PLUS BLOCK AM45
Brand: A'OK Pages: 7
Yamaha 396 Condensed Service Data preview
396
Brand: Yamaha Pages: 7
Isuzu 4BD1 Workshop Manual preview
4BD1
Brand: Isuzu Pages: 174
Lenze MQA Series Mounting And Switch-On Instructions preview
MQA Series
Brand: Lenze Pages: 64
RADEMACHER RolloTube S Safety Instruction preview
RolloTube S
Brand: RADEMACHER Pages: 60
NOVAK BALLISTIC Instructions preview
BALLISTIC
Brand: NOVAK Pages: 2
Danfoss EM-PMI540-T4000 User Manual preview
EM-PMI540-T4000
Brand: Danfoss Pages: 71
Emerson Bettis MG Installation, Operation And Maintenance Manual preview
Bettis MG
Brand: Emerson Pages: 18
Emerson GFK-3169C Installation And User Manual preview
GFK-3169C
Brand: Emerson Pages: 124
Emerson Leroy-Somer FFB Installation Manual preview
Leroy-Somer FFB
Brand: Emerson Pages: 12
IMS MDM17Plus Specification Sheet preview
MDM17Plus
Brand: IMS Pages: 6
HARTFORD CG-125 Service Manual preview
CG-125
Brand: HARTFORD Pages: 70
Baumer Hübner ME 11 Installation And Operating Instrucitons preview
ME 11
Brand: Baumer Hübner Pages: 20
O.S. engine 91sII Owner'S Instruction Manual preview
91sII
Brand: O.S. engine Pages: 15
Kärcher G200FA User Manual preview
G200FA
Brand: Kärcher Pages: 116
Honda GX35T Manual preview
GX35T
Brand: Honda Pages: 46
Honda G42 Owner'S Manual preview
G42
Brand: Honda Pages: 2
O.S. engine OSM11532 Owner'S Instruction Manual preview
OSM11532
Brand: O.S. engine Pages: 38

Brands by name

Popular brands

Load more brands