Operation
50
Carefully read the Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
7.3.3
Refilling Coolant
NOTE!
Do not let coolant drip or leak out while refilling. Do not let coolant leak out onto the ground
or into bodies of water otherwise this will cause damage to the environment.
IMPORTANT!
Engine damage caused by excessive temperature difference!
When refilling with cold coolant in an engine at operating temperature there is a risk of en
gine damage caused by excessive temperature difference.
For this reason:
S
Do not fill with cold coolant.
Fill the cooling system of the engine with a mixture of tap water and ethylene glycol antifreeze agent or an
ticorrosion agent.
NOTE!
The cooling system is not included in MAN's scope of delivery.
Add coolant according to the manufacturer's operating manual.
