background image

11

Warranty

Manaras-Opera warrants its operators to be free from defects in material and workmanship under normal and proper
use for a period of  

three years

  from date of invoice, unless otherwise stated. Mechanical, electrical and electronic

accessories are warranted for one year from date of invoice, unless otherwise stated. Wearing parts such as clutch
pads, v-belts, and brake bands are excluded from warranty. 

Manaras-Opera’s only obligation shall be to repair or replace defective equipment which does not conform to the
warranty. Manaras-Opera shall not be liable for any injury, loss or damage, direct or consequential, arising out of the
inability to use the equipment. Before using, Buyer and/or the ultimate User shall determine the suitability of the
product for its intended use, and User assumes all risks and liability in connection therewith. The foregoing may not
be changed except by an Agreement signed by an authorized representative of Manaras-Opera.

The articles that are replaced pursuant to the terms of this warranty shall be retained by Manaras-Opera, and the
User is responsible for any freight costs relating to repair or replacement.

The foregoing warranty is exclusive and in lieu of all other warranties of quality, whether written, oral or implied
(including any other warranty of merchantability or fitness for purpose).

The following are exclusions from warranty:

If   usage,   product   modification,   adaptation   or   installation   are   not   in   accordance   with   our   installation   and
operating instructions.

If the product has been opened, dismantled or returned with clear evidence of abuse or other damage.

If our written specifications are not properly applied by the Buyer when selecting the equipment.

If our written instructions for installation and wiring of the electrical connections have not been followed.

If our equipment has been used to perform functions other than the functions it was designed to handle.

If Manaras-Opera equipment is used with electrical accessories (switches, relays, etc.) that have not been
previously approved in writing by the Manaras-Opera Engineering Department.

If electrical accessories and other components have been used in disregard of the basic wiring diagram for
which they were designed.

All costs related to installation and reinstallation of the Manaras-Opera equipment covered by this warranty are not
the responsibility of Manaras-Opera. Manaras-Opera will not be responsible for any consequential damages following
installation procedures performed by the Buyer or the User. If the Buyer resells any Manaras-Opera products to
another Buyer or User, it shall include all of the terms and provisions of this warranty in such resale. Manaras-Opera’s
responsibility to any such Third Party shall be no greater than Manaras-Opera’s responsibility under the warranty to
the original Buyer.

Returns

No returns will be accepted without prior written authorization by Manaras-Opera. All returns must be accompanied by
a Return Authorization Number issued by Manaras-Opera, and all unauthorized returns will be refused. The return
shipment is to be freight prepaid by the Buyer, and under no circumstances shall the Buyer deduct the value of the
returned merchandise from any remittance due. A restocking fee of 15% of the Manaras-Opera sale price will be
charged for all returns not covered under warranty.

For technical support, please call 

1-800-361-2260

 or visit 

www.manaras.com

 for more information

Summary of Contents for Silencio OTBH-A.06













Reviews: