Ref.: WB-VL-65 DSP LX Premium - OM Ver.1.6 (B2927)
14
6. DESCRIPTION OF MAIN PARTS
The System consists of Main Cabinet, Rotor, Electronic assemblies, Display unit, Control panel,
Mechanical brake, Distance/Dia measuring rod, Width measuring rod, Wheel guard, Standard
accessories and Optional accessories.
Fig. 10
Fig. 11
Sl.
No.
Description
Sl.
No.
Description
1
Main cabinet
10
Wheel seating cone-Ø94-Ø111.5mm
2
Wheel clamping threaded shaft
11
Wheel seating cone-Ø80-Ø97.5mm
3
Quick Change Lock Nut
12
Wheel seating cone-Ø66-Ø83.5mm
4
Control panel
13
Monitor column
5
Distance & Dia measuring rod
14
AC Input socket
6
Width measuring rod
15
On/Off Rocker Switch
7
Wheel guard
16
Laser (NA for Premium model)
8
Wheel guard bracket
17
Torch (NA for Premium model)
9
Mechanical brake
18
Sticker weight holder
19
Display unit
6.1.
MAIN CABINET
Main cabinet is the housing for Electronic unit, Rotor, Motor and Control panel.
Mains power cable is situated at the rear side of Cabinet & ON/OFF switch is provided
at side of cabinet. Control fuses are incorporated to protect electronic assemblies
against short circuit & high current. AC (Inlet) socket with Fuse holders is mounted on
the rear side of Main cabinet which can be easily accessed from outside for replacing
the blown fuse. Always replace the Control fuse with same type and rating of CE
marked Fuse.
Control fuse - 1 No. is provided in Line & 1 No. is provided in Neutral
For
– 230V
Specifications
– 3A, Dia 5mm x 20mm, Slow blow type Glass fuse
The Fuse will blow in 5 seconds (max.) for maximum current of 3A
For
– 110V
Specifications
– 10A, Dia 5mm x 20mm, Slow blow type Glass fuse
The Fuse will blow in 5 seconds (max.) for maximum current of 10A
Turn OFF the switch and unplug the balancer before doing any maintenance or
repair work
6.2.
ROTOR
The Rotor assembly consists of the Driven pulley mounted on the shaft located in the
Bearing housing, Mid Centering Device and the RPM encoder assembly.
1
2
4
5
7
9
6
3
18
19
8
10
11
12
15
13
14
16
17
17
