FILLING THE LP GAS TANK
1.
Before entering the LP
gas bulk plant or service station, make sure all pilot lights are extinguished.
Shut off gas to all appliances by closing the LP gas main shut off valve.
2.
Extinguish open flames and smoking materials.
3.
Never remove the LP
gas tank from the motorhome. Always drive the motorhome to the gas supplier
to fill.
4.
Have the supplier connect the fill nozzle to your tank fill connection.
5.
Always remember to close the supply valve, and open the 20% liquid level valve.
6.
Never use a wrench to close the service valve or 20% gauge. If when closing by hand, leaking occurs,
have the valve repaired or replace.
7.
Drive at least one mile from the LP
supplier before relighting pilot lights or appliances. This will allow
any minimal leakage which occurred while filling the tank to dissipate.
DO NOT
light pilot lights if you
continue to smell LP
gas. Shut off the Supply Valve. Allow the recreational vehicle to ventilate for 30
minutes. If you still detect LP gas odor, have the source of the leak located and repaired.
Never use any other tank than the one furnished with your recreational vehicle. If the tank must be replaced,
check with your dealer for correct tank specifications and replacement procedure.
WARNING: Make sure that the tank is not filled beyond the 80% liquid level. If the tank has
been overfilled, make sure the LP supplier bleeds out the excess. Overfilling the LP gas
container does not allow for the necessary 20% vapor expansion space that can result in
uncontrolled gas flow which can cause fire or explosion.
WARNING: Make sure the tank service valve is accessible at all times. In an emergency, it
may be necessary to shut off the valve quickly.
11-2
Mandalay
!
!
LP TANK COMPARTMENT
Summary of Contents for 38A 2004
