8
Temperature controller 70304 | 1.02.00
www.mc-techgroup.com
8
DESCRIPTION
The controller type
70304
is provided for front panel mounting and the controller type
70304.2
is provided for
rail mounting.
(1)
Actual value display
red, 10mm high, 4 digits
(4)
PGM-key
in order to select parameters
in order to change values
in order to change values
Exit-key
in order to leave the levels
(2)
Active Setpoint
Factory setting SP1
(5)
Indication
yellow for
- Switch status of binaryoutputs 1 – 6
(display lights up = on)
- ramp/programm function is active
- manual operation is active
(3)
Setpoint
Four digit, green; decimal place is configurable;
Also used for operator prompting (display of pa-
rameter and level symbols)
(6)
16-segment display for the unit °C / °F
factory setting °C
Figure 1 Display/control elements
