14
M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA
Tel: +630-858-6101 Fax: +630-858-6134
V.062414
4.
With the pallets in the “UP” position, position the unit into the print station so that the Quartz Heating
Elements are centered over the pallet. Lock the four Swivel Casters by pushing down on the Caster
Locks (1).
5.
Dimensions between the surface of the Quartz Heating Elements and the pallet surface should be
approximately 2-
1/4” (5.7 cm). Proper distance is determined by the type of ink used and the type and
weight of the substrate.
Note: Run a few tests to determine the proper distance before beginning production.
To adjust the height, loosen the Lock Handle (2). Lift the handle (Model 1418) up or turn the Height
Adjustment Wheel (1) clockwise to raise the unit or counterclockwise to lower the unit. Tighten the Lock
Handle (2) to lock in position.
Summary of Contents for Red Chili 1418
Page 1: ...Red Chili Nv3 Part MAN REDCHILI 95 00 USD V 062414...
Page 2: ......