M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA
17
Tel: +630-858-6101 Fax: +630-858-6134
V.062414
4.2.3 Install Foot Pedal
The unit is designed to receive operational signals from the flash sensor mounted on the unit, foot pedal or the
press PLC.
WARNING
: Ensure none of the pallets are positioned under the unit for an excessive
amount of time while the unit is on. Extreme heat can damage pallets, garments and/or cause a fire.
1.
Place the
Press PLC/Foot Pedal/Flash Sensor
switch in the center or
Foot Pedal
position (1).
2.
Connect the foot pedal cable to the socket (1) on the unit.
3.
Index the printed garment to the flash position. Depress and release the Foot Pedal to start the flash
unit. When the Flash Timer reaches 0, the unit turns off.
Summary of Contents for Red Chili 1418
Page 1: ...Red Chili Nv3 Part MAN REDCHILI 95 00 USD V 062414...
Page 2: ......