dmc3-4
M&S Systems | 2861 Congressman Lane | Dallas, Texas 75220 | 800.877.6631 | www.mssystems.com
17
RF Remote Control (Optional)
Up to 4 different remotes can be programmed to control the Master Station. The
system obtains a unique code from the remote, virtually insuring that no one else can
interfere with your system and you will not interfere with anyone else.
To program the RF remote:
1.
Simultaneously press and release AUTO and SOURCE. RF and SET appear on the
display.
2.
Press and hold any button on the remote until the RF and SET disappear from the
display. The remote is now ready to use.
Note: To cancel programming of remote, press and release AUTO and SOURCE.
The remote is an RF (radio frequency) remote control, which means that you can use it
from any location in the house. You do not have to be in the same room as the Master
Station.
Figure 13—RF Remote
Note: If 4 remotes have previously been programmed and a replacement remote (due
to breakage or loss) is ordered, all 4 remotes will need to be reprogrammed.
Tune Up
Scan radio stations when AM or FM are
selected as audio source. Scan mode is set
at Master Station.
Source
Select audio
source: AUX,
AM, FM, CD
Tune Down
Scan radio stations when AM or FM are
selected as audio source. Scan mode is set
at Master Station.
Volume Up
Press and hold to turn on System Music.
Press to adjust System Music volume.
Volume Down
Press and hold to turn off System Music.
Press to adjust System Music volume.
