2861 Congressman Lane | Dallas, Texas 75220 | 800.877.6631 | www.mssystems.com
Page
29
Wake Menu
The wake feature allows you to program the MC2000 room station to begin playing
music at a specific time, much like an alarm clock, or clock radio. You can store up
to five events, or wake times. The wake function works only with the AM or FM
source. To select the Wake Menu see Figure 20.
Figure 26 - Wake Menu
•
Event
: The currently selected wake event. The MC2000 allows you to
preset up to 5 unique wake events per room on the system.
•
Advance the Wake Event Source
: It advances in this sequence: FM1,
FM2, FM3 (etc.), AM1, AM2, AM3 (etc.), Then back to FM1.
•
Volume control
. It is set at 06 for the lowest, and 34 for the highest. To
change the volume, press the button until it reads the desired volume.
•
Cancel
: Cancels all the changes and they will not be saved on the system.
•
Enabled/Disabled
: A toggle activating or deactivating the current event. If
the room station displays “Enabled” the wake even is scheduled. If the display
says, “Disabled” the wake event is not scheduled.
•
Time setting
: Press to access the time set menu. Use the up and down
arrow keys to set the hour and minute. Be sure and press
Set
to save the
time in the system.
•
Snooze
– This feature allows you to establish a preset snooze time of an
additional 5, 10 or 15 minutes. After the wake event is triggered, you can hit
snooze for the preset snooze time. The music will go off until the desired
number of minutes has passed then the music will start playing again.
Toggle between the wake
events - up to 5 events
Change the Wake Event
Source.
Volume setting
Enables or disables the wake
event currently showing.
Sets the time of the event.
Snooze setting duration
Cancel the changes or Store
the wake settings.
Return to the Main Menu.
