M&S Systems | 800.421-1587 | www.mssystems.com
9
XDM
4600
Example of programming a macro
To program a macro that turns on the tuner, turns on the CD player, opens the CD player drawer, waits
10 seconds, and closes the CD player drawer:
1.
Press LEARN and MACRO.
2.
Select CD1 as your macro storage key.
3.
Press Tuner.
4.
Press POWER.
5.
Press CD.
6.
Press POWER and hold for 5 seconds. This allows time for the CD player to turn on.
7.
Press OPEN and hold for 10 seconds. This allows time for the drawer to open and for a CD to be
inserted.
8.
Press OPEN again. This closes the drawer.
9.
Press LEARN. MACRO OK appears on the display.
To launch the macro, press MACRO and CD
1
.
Other functions
Clear Stored Data
1.
Press the CLEAR button on the back of the remote. Use a paperclip or similar tool to press the
button.
2.
Press the audio source button, storage key, or macro program you want to clear. If no button is
pressed within 15 seconds, the remote exits Clearing Stored Data mode.
Reset the Remote
Press the RESET button on the back of the XDM46R. Use a paperclip or similar tool to press the button.
After reset, all data remains, but the clock and date have to be set again.
Low Battery Indicator
•
When the batteries are low, a battery symbol appears on the display. The remote still operates.
•
When the battery symbol starts blinking, all remote functions are locked until new batteries are
installed.
Door Station (DS3B2)
•
When someone presses the door chime, all music on the system is muted until the chime stops.
•
The door chime can be heard in all zones, even if the Zone Keypad is turned off.
•
Only one Door Station (DS3B2) can be used per system.
115951B.pdf 14
115951B.pdf 14
12/16/2005 8:06:46 AM
12/16/2005 8:06:46 AM
