Airflo
Mk3
7
freedom through lightweight solutions
MI0259 issue 11
Airflo
Weight:
4.6Kg (10lbs)
Output pressure:
0.35 bar (5 psi)
Battery:
1 x 12Vdc - 2.3Ah
(
Maintenance free
Valve Regulated Sealed Lead Acid)
Battery Life:
Approx 1000 charging cycles (
2 - 5yrs Depending on usage
)
Lifting performance (
from full battery
):
Bathing Cushion - 4 bathing cycles;
Surfer Bather - 10 bathing cycles; Handy Pillow Lift - 11 lifts; Sit-u-Up - 20 lifts; Leglifter - 8 lifts
Environmental protection:
(Airflo housing)
IP51 (
Protection against large dust deposits & vertical falling drops of water
)
(Push-button hand control)
IP67 (
Totally protected against dust & immersion in water
)
Type BF equipment
This equipment has been tested and meets the requirements of current EMC legislation.
Charger:
Model number
- CB0088 (UK)
Input:
AC 100v - 230v, 50-60Hz, 0.3A
Output:
DC 15v, 350mA
Double insulated Class II equipment
Specifications
Trouble shooting guide
Ensure that the air hose from the product
being inflated is connected to the Airflo.
Move either the compressor or other item
further away from each other until the
interference stops.
Check that there are no kinks in the air
hose.
This happens when the compressor’s internal
temperature cut-out has tripped. Leave the
Airflo for 60-90 minutes to cool.
This happens when the current overload
cut-out has tripped. Leave for 3 seconds to
self reset.
Compressor does not run when ‘up’ is
selected on the 2-way hand control.
Compressor causes electrical interference
with another piece of electrical equipment.
Compressor keeps stopping when trying to
inflate the lifting aid.
Battery State Indicator light flashing ‘Red’.
Battery State Indicator light flashing ‘Red/
Green’.
English
