Simple solutions for everyday independence
5
Installation and Use
B
C
1
Getting Started
The Airflo does not have an ‘on/off’ switch.
To operate the compressor or activate the
Battery Status Indicator, connect the hand
control and momentarily press either the ‘Up’
or ‘Down’ button.
If the Airflo is not used for approximately 5
minutes it will go into ‘sleep’ mode and the
battery status indicator light will go out.
Battery Status Indicator
Before use, check that the battery is sufficiently
charged (see ‘Getting Started’). If the battery is
fully charged, the indicator light (
A Fig. 1
) will
show a steady Green light.
Steady Green
= Fully charged.
Flashing Green
= Recharge soon.
Steady Red
= Recharge immediately
(will not deflate).
Flashing Red
= Over temperature cut-out
(will not deflate or inflate).
NOTE: If charge is too low the ‘Down’ button
on the hand control will not work.
The Airflo needs to be recharged when the
indicator light is flashing Green.
Charge the battery overnight before first
using the Airflo.
Connecting
•
Position the Raiser Lifting Cushion on the
armchair so that the air hose is at the rear.
•
Connect the air hose (
B Fig. 2
) and the
hand control lead (
C
) to the Airflo.
•
Place the hand control within easy reach.
A
2
