6
Care and Maintenance
Cleaning
Routine cleaning
•
Fully inflate the Raiser Lifting Cushion for cleaning.
•
All components can be cleaned with a proprietary non abrasive mild liquid cleaner or
disinfectant. Always follow packaging instructions for using mild detergent products.
NOTE:
Before using proprietary cleaners, always test on an inconspicuous area.
•
Use a soft cloth when cleaning.
•
Do not wash the product in boiling water.
IMPORTANT: Following cleaning, rinse thoroughly with clean water to remove all soap deposits.
Wipe dry or leave to air dry. Never store the Raiser Lifting Cushion when it is wet or damp. Do not
leave in bright sun light.
Do not dry using hot air
.
Operating - (Figs. 3 & 4)
•
Keep your feet firmly on the floor, slightly
apart and as close to the front of the
armchair as possible.
•
With your hands on the armrests to steady
yourself, lean forward and transfer your
weight to the front of the seat.
•
To rise, press and hold the “Up” button on
the hand control. Release the button to stop
at any height.
•
To lower, press “Down” on the hand control.
To stop lowering at any point, momentarily
press the ‘Up’ button.
•
After leaving the seat, press and hold the
‘Down’ button until the initial release of air
has occurred. The Raiser Lifting Cushion will
carry on deflating after the ‘Down’ button is
released, ready for when the cushion is next
used.
NOTE: If the air hose is disconnected, the Raiser
Lifting Cushion will deflate.
4
3
