8
Care and Maintenance
=
1.8m
Specifications
Rated Load:
190kg (30st)
I
nflated height:
23cm
Inflated width:
43cm
Inflated length:
43cm
Weight:
0.70kg
Maximum inlet pressure: 0,35 bar (5psi)
Max / Min temperature: +50ºC / -15ºC
Troubleshooting
Problem
Remedy
Compressor does not run when ‘Up’ is selected
on the hand control.
Ensure that the air hose from the Raiser Lifting
Cushion is connected to the Airflo.
Compressor keeps stopping when trying to
inflate the Raiser Lifting Cushion.
Check that there are no kinks in the air hose.
Battery State Indicator light flashing ‘Red/
Green’.
This happens when the current overload cut-
out has tripped. Leave for 3 seconds to self
reset.
Battery State Indicator light flashing ‘Red’.
This happens when the compressor’s internal
temperature cut-out has tripped. Leave the
Airflo for 60-90 minutes to cool.
Compressor causes electrical interference
with another piece of electrical equipment.
Move either the compressor or other item
further away from each other until the
interference stops.
For further assistance with resolving a problem please contact our Customer Service
Department by c44(0)1544 267674 or email sales@mangar.co.uk
43cm
43cm
23cm
