2
Thank you for purchasing the MANHATTAN
®
SATA 6Gb/s PCI Express Card,
Model 150408. With two SATA 6 Gbps channels to access internal SATA
storage devices, this controller provides an easy way to upgrade your
system to support SATA or add additional SATA ports while enjoying
these additional features:
• Fully compliant with SATA 2.6
• Supports 1-lane 5 Gbps PCI Express and SATA transfer rates to 6 Gbps
• Native command queuing (NCQ) maximizes drive efficiency and
reduces latency
• Supports hot-plug capability and large-capacity drives over 137 GB
• Includes low-profile PCI bracket
• Windows compatible — Plug and Play
• Lifetime Warranty
SofTwArE InSTAllATIon
With a fresh (new) Windows 7/Vista/XP installation
1. Power off the computer. Insert the SATA 6Gb/s PCI Express Card into
an available PCIe slot and connect the serial ATA cable(s) between
the SATA port and serial ATA device(s). Turn on the computer.
2. Insert your Windows 7/Vista/XP CD into the CD-ROM/DVD drive.
3. Press <F6> for third-party SCSI or driver installation at the beginning
of the text mode installation. Press <S> when Setup asks if you want
to specify an additional device, and insert the driver CD. Press <Enter>
and select “Marvell AHCI SATA Controller xxbit Driver” in the folder
E:\ SATA6G_M9128 \ Fresh.
4. Press <Enter> again when you’re prompted to continue with text
mode setup.
5. Follow the Setup instructions to select your choices for partition and
file system.
6. After Setup examines your disks, it will copy files from the CD to the
hard drive selected above and restart the system. After restart, the
Setup process will resume to finish the installation.
7. Once the operating system installation is completed, you can follow
the steps below to verify the card was installed correctly.
