3
hardware INstallatIoN
1. Turn off the power to the computer system.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCIe slot.
4. Carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push
the board down firmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
drIver INstallatIoN
NOTE:
Make sure the board is installed before proceeding with driver installation. Insert the
included driver CD in the computer’s CD-ROM drive.
158176_02_manual.indd 3
2/10/09 1:58:46 PM