Manhattan 158213, User Manual

driver inStallation 

IMPORTANT:

 Make sure that you’ve completed the driver installation 

before proceeding with the hardware installation. 

Windows 2000 / XP / Server 2003

1. Insert the included driver CD in the PC’s CD-ROM drive. 

2. On the desktop, click “Start,” then click “Run.” 

3. Enter “D:\PCI_IO\MCS9865\XP\P

CISetup.exe,” then click “OK.” 

4. Click “Install” to install the drivers. 

5. Click “Exit” to complete the driver installation.

6. Shut down the PC. 

7. Place the PCI card into PCI slot (see Hardware Installation below), 

  then power on the system. 

8. Once the system boots, Windows will automatically start installing the

  driver software. 

Windows XP-x64 / Server 2003-x64

1. Insert the included driver CD in the PC’s CD-ROM drive. 

2. Enter “D:\PCI_IO\MCS9865\XP64\P

CISetup.exe,” then click “OK.” 

3. Click “Install” to install the drivers. 

4. Click “Exit” to complete the driver installation.

5. Shut down the PC. 

6. Place the PCI card into PCI slot (see Hardware Installation below), 

  then power on the system. 

7. Once the system boots, Windows will automatically start installing the

  driver software. 

Windows Vista

1. Insert the included driver CD in the PC’s CD-ROM drive. 

2. Enter “D:\PCI_IO\MCS9865\Vista32\P

CISetup.exe,” then click “OK.” 

3. Click “Install” to install the drivers. 

4. Click “Exit” to complete the driver installation.

5. Shut down the PC. 

6. Place the PCI card into PCI slot (see Hardware Installation below), 

  then power on the system. 

7. Once the system boots, Windows will automatically start installing the

  driver software. 

44