Verifying Windows 2000/XP/Server 2003 Installation
1. Right click on "My Computer," then click "Manage."
Click on "Device Manager."
2. Click on "+" in front of "Ports (COM & LPT)." Two
"NetMos PCI ECP Parallel Port …" options should
be displayed.
3. Double-click on "Multifunction adapters." "NetMos
9815 PCI Multi-I/O Controller " should be
displayed.
Changing the Parallel Port Address
Some parallel devices need a specific parallel port in order to work. If your device works properly,
don’t change this setting. Otherwise, follow these steps for Windows 2000/XP/Server 2003.
1. From the Device Manager window, double-click "Ports (COM & LPT)," then double-click on
"NetMos PCI ECP Parallel Port..."
2. Click on the Port Settings tab.
3. At the "LPT Port Number" box, click the down arrow and select an LPT port that is not in use.
4. Click "OK," then close Device Manager to save the changes.
