Red
LED
Blue
LED
•
•
Power
To turn the headset on, press and hold Button 1
(see chart and image above) for approximately
3 seconds. Two beeps will sound and the blue
LED will flash to indicate that power is on.
To turn the headset off, press and hold Button 1
for approximately 5 seconds. Two beeps will sound and the red LED
will flash to indicate that power is off.
Pairing with Your Cell Phone or Other Bluetooth Devices
1. With the MANHATTAN Bluetooth Headset turned off, press and
hold Button 1 until the red and blue LEDs flash alternately to
indicate the headset is in pairing mode.
2. Proceed with the pairing process as directed in your cell phone
(or other Bluetooth device) manual.
3. When prompted for a PIN, enter “0000” to complete the pairing
process. The blue LED will flash, indicating the
headset is now in standby mode.
NOTE:
Some cell phone manuals will instruct you
to keep the headset connected to your cell phone
at this point.
4. If the pairing attempt is unsuccessful after
a minute or so, the procedure will be stopped
and Steps 1–3 will need to be repeated. (If the headset isn’t in
pairing mode, the cell phone — or other BT device — can’t locate it.)
