107
Reset (12):
Unselect all mappings.
After you finish with all settings, click Apply (13); the following
message will be displayed on your Web browser:
Click Continue to go back to the previous setup menu or to
continue to other setup procedures; or click Apply to reboot the
router so the settings will take effect (wait about 40 seconds while
the router is rebooting).
If you decide to reset all the settings on this screen back to
previously saved values, click Cancel.
3-2-3 Virtual Server
This function allows you to redirect a port of the Internet IP address
(on WAN port) to a specified port of an IP address on the local
network, so you can set up an Internet service on the computer on
the local network without exposing it on the Internet directly. You
can also build many sets of port redirection to provide many
different Internet services on different local computers via a single
Internet IP address.
Click NAT on the left side of the Web management interface, then
click Virtual Server; the following message will be displayed on your
Web browser:
