109
Reset (9):
Remove all inputted values.
Virtual Server
All existing virtual server mappings will be
Table (10):
displayed here.
Delete (11):
Select a virtual server mapping by clicking
the “Select” box of the mapping, then click
Delete Selected to remove the mapping. If
there’s no existing mapping, this option will be
grayed out.
Delete All (12):
Delete all mappings in the Virtual Server table.
Reset (13):
Unselect all mappings.
After you finish with all the settings, click Apply (14); the following
message will be displayed on your Web browser:
Click Continue to go back to the previous setup menu or to
continue to other setup procedures; or click Apply to reboot the
router so the settings will take effect (wait about 40 seconds while
the router is rebooting).
If you decide to reset all the settings on this screen back to
previously saved values, click Cancel.
