45
again, and you should be able to log in with the new password.
2-4-3 Remote Management
This router does not allow management access from the Internet to
prevent possible security risks (especially when you use a weak
password or didn’t change the default password); however, you can
still manage this router from a specific IP address by enabling the
Remote Management function.
Click System on the left side of the Web management interface,
then click Remote Management.
Here are descriptions of every setup item:
Host Address (1): Input the IP address of the remote host you
wish to initiate management access to.
Port (2):
You can define the port number this router
should you expect an incoming request. If
you’re providing a Web service (default port
number is 80), you should try to use another
port number. You can use the default port
setting (8080) or something like 32245 or 1429
(any integer between 1 and 65534).
Enable (3):
Select the field to start the configuration.
When you finish with all settings, click Apply.
1
2
3
4
