61
Disable/Enable/ There are three selections to enable or disable
Enable (Station
wireless ISP functions.
Mode Only) (1):
Disable: Disable this function.
Enable: Enable this function and the router can
also act as an access point and allow the
wireless clients to associate to it for WAN
access service.
Note: In this mode, if you are informed by
your wireless ISP that the wireless settings
of the access point have changed, configure
the router on this screen to match the
settings.
Enable (Station Mode Only): Enable this
function and the router will act as a wireless
client, and after connecting to WISP network
devices, WAN access service will be built up
through wireless. Users are allowed to access
the WAN service through wired Ethernet or
through another wireless band.
SSID (2):
This is the name of the wireless network. Input
the SSID name that your wireless ISP provides.
Channel Number This is the radio frequency used to transmit and
(3):
receive the wireless signal. The wireless
devices in the same network should follow the
same settings. Select the channel designated
by your wireless ISP.
Wireless Band
Check with your Wireless ISP service provider
(4):
as to whether 2.4GHz or 5GHz wireless band is
used for the network, and then select the
wireless band here.
Site Survey (5): Click Select Site Survey, and a Wireless Site
