62
Survey Table will pop up. It will list all available
access points nearby. Select the access point
designated by your wireless ISP in the table
and the router will join the wireless network
through this access point.
Security Setting If the access point enables wireless security,
(6):
you need to follow the same settings in order to
access the access point. Click to set security
settings for this connection (go to section 2-7-3
Wireless Security for detailed instructions).
After you finish with all settings, click Apply (7) and the following
message will be displayed on your Web browser:
Click Continue to go back to the setup menu or to continue to other
setup procedures, or click Apply to reboot the router so the settings
will take effect (wait about 40 seconds while router is rebooting).
If you decide to reset all settings on this screen back to previously
saved values, click Cancel.
