64
To set the wired LAN parameters:
Click LAN on the left side of the Web management interface. There
are three setup groups here: LAN IP, DHCP Server and Static
DHCP Leases Table. Following are the setup instructions for each:
2-6-1 LAN IP section:
Here are descriptions of every setup item:
IP address (1):
Input the IP address of this router.
Subnet Mask (2):
Input the subnet mask for this network.
802.1d
To activate the 802.1d spanning tree
Spanning Tree (3):
function, select Enabled.
DHCP Server (4):
To activate the DHCP server function,
select Enabled.
2-6-2 DHCP Server:
Recommended Values/Settings if you don’t know what to enter:
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
802.1d Spanning Tree: Disabled
DHCP Server: Enabled
1
3
2
4