77
2-7-1-3 Setup procedure for AP Bridge-Point to Point:
In this mode, you can connect your wireless router with another to
combine two access points and expand the scope of a wireless
network, so all clients (wired only – AP will not accept wireless
clients in this mode) will think they’re on the same physical network.
This function is very convenient when you need to connect two
networks between two buildings. To connect two wireless routers
together:
2.4GHz AP Bridge (Point to Point) Settings
5GHz AP Bridge (Point to Point) Settings
Here are descriptions of every setup item:
Band (2):
Select the band you want to use; two wireless
routers must use the same setting.
NOTE: Two wireless routers must use the same mode, band, channel
number and security settings!
1
2
3
4
5
1
2
3
4
5
