82
5GHz Universal Repeater Settings
Here are descriptions of every setup item:
Band (2):
Select the band you want to use. All the
wireless routers must use the same setting.
SSID (3):
This is the name of wireless router. You can
enter up to 32 alphanumerical characters. The
SSID is used to differentiate your own wireless
router from others in the area. The default SSID
is “default.” It’s recommended that you change
the default SSID to the one that is meaningful to
you, like myhome, office_room1, etc.
Channel
Select a channel. All the wireless clients must
Number (4):
use the same setting.
Associated Clients Click Show Active Clients and Active Wireless
(5):
Client Table will pop up. You can see the status
of all active wireless stations that are
connecting to the access point.
Root AP SSID (6): In Universal Repeater mode, this device can act
as a station to connect to a Root AP. You
should assign the SSID of the Root AP here or
click Select Site Survey to choose a Root AP.
1
2
3
4
5
7
6
