85
Threshold (1):
Do not modify the default value if you don’t
know what it is.
The default value is 2346.
RTS Threshold (2): Set the RTS threshold of the wireless radio.
Do
not modify the default value if you don’t
know what it is.
The default value is 2347.
Beacon Interval
Set the beacon interval of the wireless radio.
(3):
Do not modify default value if you don’t
know what it is.
The default value is 100.
DTIM Period (4): Set the DTIM period of the wireless radio.
Do
not modify the default value if you don’t
know what it is.
The default value is 3.
Data Rate (5):
Set the wireless data transfer. Since most
wireless devices will negotiate with each other
and pick a proper data transfer rate
automatically,
it’s not necessary to change
this value unless you know what will
happen after modification.
N Data Rate (6): Same as above, but only for 802.11n &
802.11ac clients.
Channel Width (7): Set the channel width of the wireless radio.
You
can modify the default value if you know
what channel width you need.
The default
setting is 20 MHz.
Preamble Type
Set the type of preamble.
Do not modify the
(8):
default value if you don’t know what it is.
The default setting is Short Preamble.
Broadcast ESSID Decide if the wireless router will broadcast its
(9):
own ESSID or not. You can hide the ESSID of
your wireless router (set the option to Disable)
so only those who know the ESSID of your
