USB 2.0 Windows 98SE Installation:
Place the installation CD in the CD-ROM and connect the
external enclosure to your computer. Auto Detect will run the Add New Hardware wizard, which
searches for new drivers for the USB 2.0 external enclosure. Click "Next." Select "Search for the best
driver for your device (recommended)"; click "Next."
Select "Specify location"; browse to "CD-ROM E:\USB 2.0-98 Driver"; click "Next." With the prompt
"Windows driver file search for the device Hi-Speed USB-to-IDE Bridge Controller," click "Next" to get
the prompt "Windows has finished installing the software that your new hardware device requires."
Click "Finish." Installation is complete; just restart your computer.
NOTE:
For Windows Me/2000/XP,
no need to install the additional driver: It’s already installed. Windows XP needs to be updated with SP2.
IEEE 1394 Installation:
The IEEE 1394 interface is Plug and Play, so no driver setup is needed.
5. Attach the back cover
with the 6 screws —
and installation is
complete.
3. Connect the
IDE interface
to your Slim
DVD/CD-
ROM drive;
attach to the
panel with
the screws.
2. Insert your
Slim DVD/
CD-ROM
into the
panel.
1. Remove
the front
panel
from the
enclosure.
4. Insert your DVD/CD-ROM into the
enclosure, ensuring the front cover
is properly fastened ("buckled").
702928_man.dlrev4C2.indd 3
7/26/06 10:08:39 AM
