Video Application Kit
3
3. FUN!CAM Function illustration & Specification
3.1 Function Key
3.2 FUN!CAM Specification
The following table explain FUN!CAM function:
Model
FUN!CAM
Sensor size
1/4”
Sensor type
Color CMOS image sensor
Pixel number
350K pixels
Image format
Compressed 8-bit raw data
Aperture
F=2.4
Focus length
7.2mm
Focus Range
20cm~
∞
Angle of view
52 degree (Diagonal)
Frame rate
30fps@CIF/12fps@VGA
Image Format
RGB24bit, I420
Min. illuminance
12LUX
S/N Ratio
45dB
Interface type
USB 1.0/1.1(A type)
Power supply
5V
OS platform
Window98SE/2000/ME/XP, MAC OS10.3
A.
Snap Shot Button
B.
Focal lens
C.
Power Active LED
D.
Detachable Base
E.
Microphone
D
C
B
A
D
Video Application Kit
4
4. Connecting FUN!CAM and install the driver & Application
This chat will tell you how to install camera driver and start using your
FUN!CAM .
4.1 Before installing the FUN!CAM
1. Check to see if the USB port is enabled
E
Power on
→
press
〈
DEL
〉
key to go into BIOS setup utility
→
PNP/PCI
configuration
→
Assign IRQ FOR USB:
Enabled.
2.Check the USB device
“My Computer”
→
”System
Properties”
→
”Device
Manager”
→
”universal serial
bus
controller”, and check if
USB Host controller and USB
Root Hub device are available.
