INSTRUCTIONS
LED PROJECTOR
GALAXYLIGHTS
PACKAGE CONTENTS
•
GalaxyLights projector
•
Remote
•
USB cable
•
Instructions
TECHNICAL SPECIFICATIONS
•
Power supply: USB DC 5 V/2 A
•
Remote power supply: 2 AAA batteries (not
included)
•
Max LED power:
2 × 4 W
•
Size:
16 × 11
cm
•
Weight: 369 g
•
Material: ABS
COMPONENTS
1.
USB flash drive input
2.
Brightness adjustment
3.
Reduce volume/previous song
4.
Increase volume/next song
5.
Mute/Bluetooth ON or OFF
6.
USB flash drive/Bluetooth mode
7.
USB cable input
8.
ON/OFF switch
HOW TO USE
•
Plug one end of the included USB cable into
a charger, a computer, or a power bank and
the other end into the USB cable input (7) on
the side of the device.
•
Turn on the device by using the ON/OFF
switch (8).
•
Use the brightness adjustment button (2) to
control the LED or laser brightness. With a
short press of the button, you control the
LED brightness, and with a long press, the
laser brightness.
•
This device has a built-in Bluetooth speaker.
You can listen to music from your USB flash
drive that you insert into the USB flash drive
input (1) or use your smartphone to play the
music via Bluetooth.
•
To connect your phone with the device, long
press the Bluetooth ON/OFF button (5) and
select BTK10 on your list of available devices.
•
Use the volume buttons (3 and 4) to control
the volume or skip songs.
•
Use the USB/Bluetooth button (6) to switch
between the USB flash drive or Bluetooth
playing modes.
•
You can also use the included remote to
control the device.
