INSTRUCTION MANUAL
WI-FI SECURITY CAMERA
NIGHTOWL
COMPONENTS
•
IP Camera
•
Power adapter
•
Wi-Fi antenna 5 dBi
•
Set of mounting screws
•
Screwdriver
•
Foam base
•
User manual
TECHNICAL SPECIFICATIONS
•
Image sensor: 2.0M HD CMOS
•
Lens: 3.6mm
•
Min. illumination: 0.5 Lux (colour mode), 0.1 Lux
(black & white mode)
•
Resolution: 1920 x 1080P
•
Video compression: H.264/ MJPEG
•
Frame rate: 25-30fps
•
Audio compression: G.711a
•
Audio input: built-in-48dB microphone
•
Audio output: built-
in 8Ω 1W
speaker
•
Alarm trigger: motion detect
•
Wireless Lan: IEEE802.11b/g/n
•
Wireless security: WEP/WPA-PSK/WPA2-PSK
data encryption
•
Protocols: ONVIF, TCP, UDP, DHCP, DNS, RTSP,
P2P
•
Memory: micro SD card slot
•
Power supply: DC12V±10%
•
Waterproof standard: IP66
•
Operation condition: temperature-25°C -+65°C
•
Humidity: 10%-90%
•
Number of online users: max 5 users
•
Rotation angle: 320°horizontally/110°vertically
•
Night vision: automatic switching of double
filters, 4 dot-infrared lamps, irradiation distance
10-30 m
FEATURES
(1)
Wi-Fi antenna
(2)
Micro SD card slot
(3)
Power port
(4)
Reset button
(5)
1080p HD lens
(6)
Speaker
(7)
PIR sensor
(8)
Microphone
(9)
White LED
(10)
Infrared LED
MOUNTING THE SECURITY CAMERA
ON A WALL
1.
Drill three holes on the wall by using the base
of the security camera as a template. Make
sure to position the base unit so the camera is
in the upright direction. It is recommended
that you mark the locations of the holes with a
pencil before drilling. The diameter of each
hole is approximately 6mm, and the depth is
approximately 25mm.
2.
Insert the three plastic anchors into the holes
on the wall.
