O
OTHER FUNCTIONS SETTINGS
Device Microphone:
Switch the microphone on/off
Night Vision
:
•
Off, switch the night vision off
•
On, night vision always on
•
Auto, automatic switchover
Image rollover 180°
:
Invert the picture when the camera is installed
under the roof.
Change Wi-Fi Network:
Change the Wi-Fi on the device.
Note:
The Wi-Fi must be searchable, if the location
changed and the Wi-Fi is different, please reset and
connect to a new Wi-Fi again.
Device Details
: Check the ID and the number of the
software\hardware of the device.
Remove Device
:
Please remove the camera in your
account if you need to use another account to add
the camera.
O
SPLIT SCREEN TO WATCH
（
ONLY
FOR MULTIPLE EQUIPMENT UNDER
THE SAME ACCOUNT)
HOW TO USE A CAMERA ON A
COMPUTER
Log in: www.ucloudcam.com
FREQUENTLY ASKED QUESTIONS
1.
Can’t add the device
?
A.
Please make sure the camera has been
reset. Press the Reset button until hear the
prompt tone
B.
Only support 2.4GHZ Wi-Fi, if your Wi-Fi
router is 5GHZ, please switch to 2.4/5GHZ
dual mode.
C.
Please turn on the GPS service before
adding the device on the Android mobile
phone. After installation is complete, you
will be asked to turn on GPS service when
you use the app at the first time, if you
choose not to turn on the GPS service,
please uninstall and reinstall the app again
D.
Please confirm the camera wasn’t binding
by the other account.
There are four voice prompts in the progress:
(1)
“Ple
ase configure camera by scanning code
or AP hot spot”
(2)
Select your Wi-Fi and login with your
password, after the device makes a noise
like “beep” you will hear this “Please wait
for Wi-
Fi connecting”.
(3)
“Please wait for internet connecting” after
getting the Internet IP address.
(4)
“Internet connected welcome to use cloud
camera”
A.
If you can’t go to the second step,
please check your Wi-Fi channel is not
hidden, and the Wi-Fi router is not too
far from the camera. If this way
