11•
USER INSTRUCTIONS
MANIP tools
have been designed
for specific use,
they have their own
resistance limits.
Type of use such
as public works,
land clearing,
root cutting
is prohibited.
8
OBLIGATIONS
Read the loader and sub frame’s user manual before using the
loader.
Control the loader exclusively from the driver’s seat; keep
control of the controls until movements are completed.
Never leave the tractor with its loader in a raised position. All
valves generate an internal oil leak necessary for operation,
consequently the loader may drop.
Only use implements suitable for the job to be done.
WARNINGS
Use a sufficient counter-weight to ensure the stability of the
tractor,
(See page 6 COUNTER LOAD).
Adjust the maximum permissible tyre track of the tractor to
increase stability, refer to the manual of the tractor.
Make sure that the machine is not damaged or that some
components are not missing and that the maintenance is followed.
Periodically control that the nuts and bolts are tight especially
around the wheels and the sub-frame.
Warning. If a tractor is not equipped with a protection against
falling objects or a 4-pole structure against tipping over (tractors
with 2-pole arch), then the driver is exposed to a continuous risk
when he manipulates a load.
Always be aware of your surrounding and make sure that
nobody (especially children) is in your working area.
Study your working area and what the ground looks like; mind
the holes and hidden obstacles.
Verify and note the passage height compared to the height of
the loader.
Do not work near or on a slope.
Make sure that the headlights are always visible and are not
hidden by the tool.
Always look at the tool, objects can sometimes fall and roll
towards the driver.
Drive carefully always thinking of safety.
Never drive faster than 10 km/h when the tool is loaded.
Slow down when you are turning, lower the loader as much as
possible when in motion.
