ProduCt Features
•
Analogue and Digital (LCD) display are synchronized.
•
Auto switch on / Auto switch off
•
Round cockpit display
•
Backlight on LCD & dashboard
•
Reminder function (alarm after 24 hours)
•
Low battery indicator
First-time usaGe setuP
1.
Insert three fresh AAA batteries. Note the correct position of positive (+) and
negative (-) battery terminals. (Fig#1)
2.
The LCD will fully display for 5 seconds then turn off
3.
Tap the center of the scale once to fully display LCD and then release to activate
calibration. When “0.0” display on LCD, the calibration is done.
Note
: When re-inserting battery or replacing battery, please follow above step 3 to
activate Zero Calibration.
Fig 1
Fig 2
WeiGhiNG mode sWitCh
Adjust the weighing mode switch located on the bottom of scale to set your weighing
unit (Kg/lb). (Fig#2)
