manualshive.com logo in svg

Manitou MHT 10225, Repair Manual

The Manitou MHT 10225 is a powerful construction vehicle, designed for heavy lifting and loading tasks. Ensure its proper maintenance and repair with the free Repair Manual available for download from 88.208.23.73:8080. This comprehensive manual provides detailed instructions and troubleshooting tips to keep your MHT 10225 running smoothly.

Share
Download
background image

   

(05/06/2012)

10-06-M184EN

10

ENGINE REMOVAL

page

REMOVING THE ENGINE COMPONENTS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

PREPARATION AND SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

 

– A - REMOVING THE ALTERNATOR BELT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3

 

– B - REMOVING THE ALTERNATOR  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4

 

– C - REMOVING THE STARTER MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

 

– D - REMOVING THE OIL FILTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7

 

– E - REMOVING THE FUEL OIL FILTER AND PUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8

 

– F - REMOVING THE ENGINE COOLING WATER PUMP  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9

 

– G - REMOVING THE TURBOCOMPRESSOR  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12

REMOVING THE ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

 

– DISASSEMBLY ORDER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16

 

– REMOVING THE RADIATOR MOTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17

 

– REMOVING THE RADIATOR  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19

 

– REMOVING THE ENGINE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21

Summary of Contents for MHT 10225










































































































Reviews:

No comments

Related manuals for MHT 10225

Brands by name

Popular brands

Load more brands