background image

2-45

CAB FRONT AND REAR WORK LIGHTS SWITCH

This switch (1,

2 - 36) controls the operation of the front and rear work lights.

The switch (1,

2 - 36) has three positions: 

•  front work lights (1a,

2 - 36); 

•  deactivated (1c,

2 - 36); 

•  front and rear work lights (1b,

2 - 36).

BOOM HEAD WORK LIGHTS SWITCH

This switch (2,

2 - 37) controls the operation of the boom head work lights.

On the switch (2,

2 - 37), the LED switches on (1,

2 - 37) to indicate that the 

function is active.

REAR WINDOW DEMISTING AND DEFROSTING SWITCH

This switch (2,

2 - 38) activates the control that distributes a low electrical 

current to the rear window to facilitate frost, fog and mist removal.

On the switch (2,

2 - 38), the LED switches on (1,

2 - 38) to indicate that the 

function is active.

LATERAL WINDOW WASHER AND WIPER SWITCH

This switch (2,

2 - 39) activates the control, which activates the lateral wiper 

and dispenses washing fluid, by initiating a sweeping motion and fluid spray to 

clear the lateral window.

This switch (2,

2 - 39) activates the control that distributes a low electrical 

current to the rear window to facilitate frost, fog and mist removal.

On the switch (2,

2 - 39), the LED switches on (1,

2 - 39) to indicate that the 

function is active.

BOOM HEAD ELECTRICAL POWER SWITCH 

This switch (2,

2 - 40) controls the operation of the boom head electrical 

power.

On the switch (2,

2 - 40), the LED switches on (1,

2 - 40) to indicate that the 

function is active.

2 - 36

1a

1b

1

1c

2 - 37

1

2

2 - 38

1

2

2 - 39

1

2

2 - 40

1

2

649010 

EN/US/AU 

(16/07/2018) 

MHT 

790 

104JD 

ST4 

S1

Summary of Contents for MHT 790 104JD H ST4 S1















































































































































































Reviews: