manualshive.com logo in svg

Manitou MT 1135 ST3B, Instruction Manual

The Manitou MT 1135 ST3B is a powerful telehandler designed for heavy-duty lifting and material handling tasks. Ensure safe and efficient operation by referring to the comprehensive Instruction Manual available for free download on our website. Maximize the potential of your machine with the right manual from 88.208.23.73:8080.

Share
Download
background image

2 - 52

C - HYDRAULIC MOVEMENT CUT-OFF CONFIGURATION

 IMPORTANT 

The cut-off of "AGGRAVATING" hydraulic movements has two possible configurations. Consult your dealer to change this configuration.

Your configuration can be identified simply by driving. If indicator lamp C1 is off, configuration 1 is enabled, indicator lamp C1 is lit, configuration 2 is enabled.

CONFIGURATION 1

HALTED

SLOW SPEED

1 to 3 km/h

SPEED

> 3 km/h

TELESCOPE(S) IN 

RETRACTED POSITION

"HANDLING" MODE

A4-A5: Very slow intermittent sound alarm.

A6: Slow intermittent sound alarm.

A7: Fast intermittent sound alarm.

A8: Very fast intermittent sound alarm.

No sound alarm.

No sound alarm

The "AGGRAVATING" 
hydraulic movement 

cut-off function is 

disconnected.

"SUSPENDED LOAD" 

MODE

CONFIGURATION 2

HALTED

SLOW SPEED

 1 to 5 km/h

SPEED

> 5 km/h

TELESCOPE(S) IN 

RETRACTED POSITION

"HANDLING" MODE

A4-A5: Very slow intermittent sound 

alarm.

A6: Slow intermittent sound alarm.

A7: Fast intermittent sound alarm.

A8: Very fast intermittent sound 

alarm.

A7: Fast intermittent sound alarm.

A8: Very fast intermittent sound 

alarm.

When indicator lamp C1 is lit, 

the "AGGRAVATING" hydraulic 

movement cut-off function is 

disconnected.

No sound alarm.

When indicator lamp C1 is lit, 

the "AGGRAVATING" hydraulic 

movement cut-off function is 

disconnected.

No sound alarm

When indicator lamp C1 

is lit, the "AGGRAVATING" 

hydraulic movement 

cut-off function is 

disconnected.

C1

"SUSPENDED LOAD" 

MODE

A4-A5: Very slow intermittent sound alarm.

A6: Slow intermittent sound alarm.

A7: Fast intermittent sound alarm.

A8: Very fast intermittent sound alarm.

D -  DISABLING "AGGRAVATING" HYDRAULIC MOVEMENT CUT-OFF

 IMPORTANT 

Remain very vigilant during this operation. The only information available to the operator is the lift truck’s dynamic 

stability.

Authorization of this function can be configured from the OPT menu in the menu screen.

In certain cases, in order to get out of a difficult situation, the operator can bypass 
this safety system. Button D temporarily disables the cutting-off of "AGGRAVATING" 
hydraulic movements.

 

- Hold down button D (indicator lamps C1 and D1 lamp will light (60 second time 

delay)), and at the same time perform the necessary "AGGRAVATING" hydraulic 
movement with extreme care.

E - TESTING OF THE LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE

 

- Short press the 

 button to verify at any time that the longitudinal stability alarm is working.

• Correct operation:  All the LEDs A1 to A8 light for two seconds and an audible beep is sounded.

NOTE:  This test does not check the proper adjustment of the longitudinal stability limiter that must be inspected daily or 

after every 10 hours of service (see: 3 - MAINTENANCE: A - DAILY OR EVERY 10 HOURS SERVICE).

F - STRAIN GAUGE

 IMPORTANT 

Disassembly or calibration of the strain gage is prohibited, this must only be done by specially trained personnel, 

consult your dealer.

F

D

D1

647104 

(13/06/2016) 

MT 

835 

/ 1135 

/ 1335  

ST3B

Summary of Contents for MT 1135 ST3B
































































































































































Reviews:

No comments

Related manuals for MT 1135 ST3B

Brands by name

Popular brands

Load more brands