PRINTED IN U.S.A.
29
50960025/CP0514
Speed Range - MT6642 and MT8044:
Twisting the
lever end clockwise or counter-clockwise will change
the transmission speed between low, medium and trav-
el ranges.
Position “3” (Travel Range)
Position “2” (Medium Range)
Position “1” (Low Range)
Speed Range - MT10044, MT10055 and MT12042:
Twisting the lever end clockwise or counter-clockwise
will change the transmission speed between low and
travel ranges.
Position “4” (Travel Range)
Position “3” (Upper Range)
Position “2” (Medium Range)
Position “1” (Low Range)
IMPORTANT:
Care should be taken when down-
shifting or changing direction, because damage to
the transmission can occur if shifting is forced or
attempted at too high a speed. Allow engine
speed to slow before any downshift or directional
change is attempted.
Steering
Turn the steering wheel to the right or left to turn the
machine in that direction. The power steering system is
designed to provide low effort steering without shock
reaction from the tires to the steering wheel.
FLOOR AND SEAT AREA
Throttle Pedal:
This pedal, operated by the right foot,
controls the engine speed to match power require-
ments. Pushing down on the pedal increases engine
speed; letting up on the pedal decreases engine speed.
Service Brake Pedal:
Pressing this pedal activates
inboard hydraulic wet-disc-type brakes on all four
wheels. Separate front and rear brake systems allow
bringing the machine to a safe stop if either system
loses pressure.
Seat Positioning:
The seat is mounted on rails for for-
ward and rearward reposi-
tioning, for comfort and to
accommodate the opera-
tor’s size. A spring-loaded
latch handle “A” under the
front of the seat actuates
the adjustment mecha-
nism.
Suspension Seat Option:
In addition to the “A”
latch handle for forward
and rearward adjustment,
this seat has a knob “B”
under the front of the seat
to adjust the suspension.
Turn the knob to the right
for a softer ride, and to the left for a firmer ride.
Seat Belt:
This machine has a retractable seat belt.
Grasp the belt on the left side of the seat, pull the belt
over your lap, and insert the belt into the buckle on the
right side of the seat until you hear it lock in place.
RIGHT SIDE PANEL
These controls and indicators are used to position the
frame, boom, attachment and outriggers. Graphic sym-
bols on the side panel indicate the control actions and
effects.
This machine is equipped with one of two types of
boom and attachment joystick control configurations,
either a two-joystick configuration, or a single tri-func-
tion joystick.
Throttle Pedal
Brake Pedal
Seat Belt
A
B
A
