50960025/CP0514
52
PRINTED IN U.S.A.
Unloading Machine Using Ramps
NOTE:
A matched pair of ramps is required.
Repeat steps 1 through 5 and proceed as follows to
unload the machine:
6.
Remove the tie-down chains/cables.
7.
If necessary, adjust the machine so that the wheels
are in line and centered with the ramps.
8.
Slowly (at the lowest engine speed possible) and
carefully drive the machine down the ramps.
THEFT DETERRENTS
Manitou Americas has recorded all component part
numbers and serial numbers. Users should take as
many of the following actions as possible to discour-
age theft, to aid in the recovery of the machine in the
event it is stolen, and to reduce vandalism:
1.
Remove keys from unattended machines.
2.
Attach, secure, and lock all anti-vandalism and
anti-theft devices on the machine.
3.
Lock doors of cabs when not in use.
4.
Inspect the gates and fences of the equipment
storage yard. If possible, keep machines in well-
lighted areas. Ask the local law enforcement
agency to make frequent checks around the stor-
age and work sites, especially at night, during
weekends, and on holidays.
5.
Report any theft to your dealer and insurance
company. Provide the model and all serial num-
bers. Request your dealer to forward this infor-
mation to Manitou Americas.
