9. Diagnostics and Fault Clearance
• DOK-CONTRL-DDC+MDD+DLC-ANW1-EN-E1,44 • 01.97
108
9.7.
Fault Report
Fig 9.5: DDC and MDD - fault report
SYSTEMKONFIGURATION
Fault Report
for digital AC Servo Dives DDC and MDD
This fault report must be used to locate and eliminate faults and their causes. It must be filled out in order to
find and eliminate hidden, sporadic or application-specific problems.
- Include a fault report when sending in any repairs.
- Fault reports must otherwise be sent to the respective INDRAMAT office
or to the INDRAMAT Quality Assurance address printed on the reverse side.
INDRAMAT would like to express its appreciation with a quick and thorough processing.
Fault report
from:
Co.:
Date:
Part no. 259 355
Problem:
Causes
Accompanying problems:
always present
present with commissioning
occurs sporadically
occurs after hrs. approx.
occurs with vibrations
is temperature dependent
unknown
connection error
external causes
mechanical damage
loose cable conn.
moisture in unit
extrinsic object in unit
problem in mech. sys.
controller breakdown
motor breakdown
cable break
blower defective
feedback defective
Is there an air conditioner
in control enclosure? Y/ N
Have there been previous
problems with this axis?
How often:
Have the problems always occurred on
certain days or times of the day?
Additional information:
Additional info:
Data on the machine with breakdown:
Describe problem:
Machine manuf.:
Machine no.:
Type:
Hrs. operated:
Comm. date:
Machine manuf. and type:
Designation of machine with breakdown:
Location:
Dept.:
Tele.:
Name:
Data on the problem drive:
PRStörDDCS1
H1
note
display
at time
the problem
occurred
Data on configuration
rating plate:
H2
U5:
U1:
U2:
U3:
U4:
DDC _._ - _ _ _ _ - _ _ - _ _
Input conn.:
one-phase
two-phase
DDC _._ - _ _ _ _ - _
Data on rating plate
of basic unit:
S.No.: _ _ _ _ _ _ -
_ _ _ _ _ A _ _ S _ _
DSM _._ - _ _ _
S.No.: _ _ _ _ _ _ -
_ _ _ _ _ A _ _ S _ _
Software module data:
Serial no.:
Motor type:
Motor data: