6. Parameter Input
• DOK-CONTRL-DDC+MDD+DLC-ANW1-EN-E1,44 • 01.97
57
6.10. Parameter List for the Machine Documents
Customer: :
Machine no.: :
Axis designation: :
DLC software status: :
As a result of a fault, parameters could be cleared. We recommend
that a completely filled out copy of this parameter list be filed with
the machine documentation so that the machine could be made
operational in this case as quickly as possible.
Name
Parameter
Input
Notes
v
max
A100
s a a a a a a a a
v
min
A101
s a a a a a a a a
Acceleration
A102
s a a a a a a a
a
a
only if B007 = 0* 03
KV factor
A103
s a a a a a a a a
Encoder
A104
s a a a a a a a
free
A105
s a a a a a a a
Switching threshold
A106
s a a a a a a a a
Preliminary signal
A107
s a a a a a a a a
a
a
only if B007 = 0* 03
Feed constant
A108
s a a a a a a a a
Direction
A109
s a a a a a a a
Homing setup parameter
A110
s a a a a a a a
Homing offset
A111
s a a a a a a a a
Homing setup parameter
A112
s a a a a a a a
Travel range minimum
A113
s a a a a a a a a a
Travel range maximum
A114
s a a a a a a a a a
Special function
A115
s a a a a a a a
Rotary table
A116
s a a a a a a a
Break point
A117
s a a a a a a a
a
a
only if B007 = 0* 03
free
A118
s a a a a a a a
free
A119
s a a a a a a a
Feed monitoring
A120
s a a a a a a a
Maximum speed
A121
s a a a a a a a
Monitoring
A122
s a a a a a a a
Following axis
A123
s a a a a a a a
free
A124
s a a a a a a a
free
A125
s a a a a a a a
Continued on next page